Back
Back
Allplan - Advanced
In this series, the Allplan CAD software is presented. The level is aimed at advanced users in Allplan.
Task 01
Slab
- Import the template file and place floor panels with a height of 20 cm each on the existing walls. Adjust the height reference and change individual points.
Task 02
Wooden beam ceiling
- Import the template file and place two beam levels above the rooms. Make sure that the two levels are laid in different directions. Use 10 beams each with the dimensions 12/20.
Task 03
Stairs
1. Create a single-step straight staircase. The staircase should be 1.80 m wide and bridge a height of 4.00 m. Determine a suitable slope ratio yourself and design the elements of the staircase according to your ideas.
Task 04
Railings
1. Import the template file Place a railing of your choice from the Allplan favorites around the pedestal. Build the railing so that it is also on the stairs.
Task 05
library items
1. Import the template file Place various library elements in the building's floor plan with the ones you already have. Pay attention to the appropriate height settings for the elements.
Task 06
Texture colors
1. Import the template file and add textures and colors of your choice to the architectural components. Use various settings, such as making some of these textures transparent or changing the reflectance.
Task 08
Importing textures
1. Import the template file and apply textures of your choice to the architecture components. Import a variety of images that you place on the components. For multi-layered components, vary the textures within the different layers.
Task 08
Save perspective
1. Use the template file from task two or use their solution for this task. Set at least 3 different display types (animation, sketch,...) and also at least 3 different camera positions. Save each of these settings as favorites and import them again as you edit.
Task 09
spaces
1. Import the template file and fill the floor plan with rooms. Define end elements and their thickness, and set surface materials for the animation window. Note: If necessary, change the basic room settings under “Default settings” - “Options”.
Task 10
Dimensioning
1. Also use the template file from the previous task or use your solution directly for this task and measure all components and label the component heights with the appropriate values.
Task 11
Text
1. Also use the template file from the previous task or use your solution to this task directly and create 3D lettering that can be attached to the house façade as a house number or street name.
Task 12
Component marking
1. Use what you have learned so far to create a floor plan of a small hut, garage or similar and label the corresponding components of your choice. Try labeling walls, openings, and more to learn about the different options.
Task 13
Quantity calculation
1. Use the building you created in the previous exercise, or import the template file if needed. Generate reports for all components, surfaces, and materials. Generate at least 3 reports and save them as PDF files.
Task 14
Sections
1. Import the template file and create at least one section. Try adding textures and dimensions to the section as well.
Task 15
Elevations
1. Use the template file from the previous task and create all four views of the building. Apply textures to them and design them as you wish.
Task 16
photo calculation, solar study
1. Import the template file and create at least one section. Try filling the section with textures and dimensions as well.
Task 17
Record video
1. Use your own three-dimensional model or import the template file. Place at least three cameras in the area and calculate a video recording. Vary the camera positions in height and viewing direction.
Task 22
export
1. Create an A2 page in portrait mode with 5 cm at the top and bottom and 2 cm on the sides. Adapt a plan frame of your choice to these conditions and create a bend in accordance with DIN 824 A on DIN A4. Insert a planhead in the lower right corner and label it with today's date, your name, and the title “Task 01 Plan Layout.” Save the plan as a PDF file and as a DWG.
export
1. Create a new plan layout from the existing project (see appendix). Create separate plan windows for the floor plan (sub-images 16, 21, 22) and for view 1 (sub-images 1000-1002) on a scale of 1:100 and arrange them on the plan layout. Save the file as a PDF and as a backup.
Task 25
topography
- Import the terrain model (download link - start file - password: loaddownload)
- Transform the 3D surfaces into a digital terrain model.
- Generate contour lines at 1.50 m intervals from the digital terrain model.
2
tasks
3
downloads
2