Back
Back
Allplan - beginners
This series of tutorials focuses on the Allplan CAD software and is specifically aimed at beginners. The tutorials are intended to teach beginners the basics of Allplan. Topics covered include the user interface, setting up viewports, creating local projects, using Share-Bimplus, handling sub-images and layers, and importing and exporting files. These tutorials provide a practical introduction to using Allplan for CAD purposes.
AllPlan 01 - User interface
AllPlan 02 - View window
AllPlan 03 - Create local projects
AllPlan 04 - Share-BIMplus
AllPlan 05 - Partial images & layers
AllPlan 06 - Importing & Exporting Files
AllPlan 07 - Create backup files
AllPlan 08 - Definitions
AllPlan 09 - Auxiliary structures
AllPlan 10 - Building structure
AllPlan 11 - Grids
Task 2:
Grids
- Use your building structure from task 01 (if you were not successful in task 01, you can import the template file).
- On a suitably labelled sub-image of your choice, create an axis grid with at least three axes in the x direction and at least three axes in the y direction and label them as you like.
- Create additional axes in the z direction.
AllPlan 12 - Foundations
Task:
Foundations
- Place strip foundations with a height of 80 cm and a width of 50 cm along the axes from task 02.
- Make sure the height settings are correct and work on a blank subimage.
- Decide for yourself whether the foundations should be aligned centrally over the axes or across the outer edges along the axes.
AllPlan 13 - Floorslabs
Task:
Slabs
- Build two floor plates of different thicknesses. One should represent the floor of the floor and the other the ceiling of the floor.
- Place the floor plates on various sub-images with different height settings.
AllPlan 14 - Exterior walls
Task:
exterior walls
- Build a maze out of walls. Here you should create and place at least 3 different walls.
- For example, vary the height, number of layers, or hatching.
AllPlan 15 - Interior walls
2
tasks
3
downloads
2
quiz
disclaimer: The software solutions presented on this website are for informational purposes only and are not intended as an evaluation or recommendation. The RECHARGE platform is a voluntary teaching and learning offer and does not guarantee specific results or services. The platform makes no claim to completeness of the content presented and focuses primarily on methodological approaches without providing a comprehensive presentation of all available techniques or strategies. Technical content is deliberately simplified in order to primarily impart methodological knowledge with a focus on BIM working methods. The content of this platform is created by students for students and is only intended as a supporting resource. The use of the content of the website is at the user's own risk. No responsibility is assumed for the topicality, correctness, completeness or quality of the information provided. All offers are subject to change and non-binding. Parts of the pages or the entire offer may be changed, supplemented or deleted without prior notice. Any liability for damage arising directly or indirectly from the use of this website is excluded. This also applies to all connections (“links”) to which this website refers directly or indirectly. Only their operators are responsible for the content of the linked pages.